Skip to content

Keybinds for Every Class

Good keybinds are the cheapest upgrade in the game. You stop looking at your bars, you keep moving while you cast, and your interrupt lands when it matters. This section gives every class the same layout, so your alt feels like your main. It is written for a normal keyboard and a normal mouse. You need nothing else.

Class Guide
Warrior Warrior keybinds
Paladin Paladin keybinds
Hunter Hunter keybinds
Rogue Rogue keybinds
Priest Priest keybinds
Shaman Shaman keybinds
Mage Mage keybinds
Warlock Warlock keybinds
Druid Druid keybinds

Three pages cover every class:

Page What it covers
Consumable keys Potions, Healthstones, bandages, food, trinkets, bombs and profession spells. The shared Bar 3 and Bar 5
Racial keybinds Where both active racials go for your race
Downranked spells Which lower ranks are worth a key

Your left hand rests on WASD and never leaves. Every spell key is one finger-reach away. Every bind in this section is a keyboard key. Mouse side buttons are an optional extra, and nothing depends on them.

Key Job Mage example
E Main filler, the button you press most Frostbolt
Q Snare, root or main control. A Paladin has none and keeps the working Seal here. A Priest has Power Word: Shield Frost Nova
R Instant damage or finisher Ice Lance (Fire Blast before 20)
F Mobility or escape Blink
1 Hard crowd control or opener Polymorph
2, 3 Area damage and situational damage. A Rogue has no area damage and keeps Slice and Dice and Rupture here Cone of Cold, Arcane Explosion
4 Interrupt, or the closest thing the class has Counterspell
5 Short defensive Mana Shield
Z Resource recovery or utility Evocation
X Big cooldown, defensive where the class has one. A Shaman has none and keeps Healing Wave here Ice Block
C Ranged pull, wand or pet command. A Paladin has no ranged pull and keeps Cleanse here. A Shaman has Attack Shoot

The jobs stay the same on every class, and the table names the few places where a class has nothing for a job. When you roll an alt, your hands already know where things are.

What 4 holds. Where a class has an interrupt, it is on 4: Pummel or Shield Bash on a Warrior, Kick on a Rogue, Earth Shock on a Shaman, Counterspell on a Mage. Where it has none, 4 holds the closest thing. A Paladin has Hammer of Justice, a stun. A Hunter has Intimidation, a pet stun. A Priest has Dispel Magic, and Silence once Shadow takes it. A Warlock has Spell Lock, which only works with the Felhunter out. A Druid’s 4 depends on the form: Bash in Bear Form, Rip in Cat Form, Hibernate as a caster.

What F holds. F is the movement or escape key where the class has one: Charge and Intercept, Sprint, Ghost Wolf, Blink, Wing Clip, Blessing of Freedom, Travel Form and Feral Charge. A Warlock has no movement spell, so F holds Death Coil. A Priest has no escape, so F holds Renew, the heal you cast on the run.

Bar The client calls it Where it sits by default Keys
Bar 1 Action Bar, buttons 1 to 12 Bottom centre 1 2 3 4 5 Q E R F Z X C
Bar 2 Action Bar 2 “Centered and attached above Action Bar 1 by default” Shift + the same key. Button 9 has no key, because Shift+F is left unbound on purpose. See Layout rules.
Bar 3 Action Bar 3 “Centered and attached above Action Bar 2 by default” Buttons 1 to 4 are on T G V B: healing potion, second heal (a Healthstone. With no Healthstone, a spare stack of the older potion tier, which shares the potion cooldown and is not a second heal), bandage, and mana potion or the class resource item. The rest are click-only class buffs.
Bar 4 Action Bar 4 “On the right side of the screen by default” A shelf for situational spells. You click them. Class guides suggest a few plain Ctrl binds.
Bar 5 Action Bar 5 “Attached to the left side of Action Bar 4 by default” Buttons 1 to 4 are on Shift+T, Shift+G, Shift+V, Shift+B: trinket slot 1, trinket slot 2, the class’s situational consumable and the profession combat item. The rest are clicks: food, water, profession spells, weapon buffs, Hearthstone.

The names and the quoted positions are the client’s own, from its options and its key bindings menu. verified (game files) Older guides and older clients say Bottom Left Bar, Bottom Right Bar, Right Bar and Right Bar 2 for Action Bar 2 to 5. Same bars, old names.

Turn the extra bars on under Options, Action Bars: one tick box each for Action Bar 2 to Action Bar 8. Bars 6, 7 and 8 are “An extra action bar that you can position in Edit Mode”. This layout does not use them. Every bar can be moved and reshaped in Edit Mode, which is a button in the game menu. verified The positions above are only where the bars start.

Bars 3 and 5 are the same on every class. They have their own page: Consumable keys.

There is no Ctrl bar. Ctrl is used in three ways, and each class guide says which keys it takes.

  1. Racials. A [mod:ctrl] macro on a Bar 1 button casts your racial while Ctrl is held. Most classes use Ctrl+X, Ctrl+F and Ctrl+Z. See Racial keybinds.
  2. Cheap ranks. The same kind of macro casts a low rank of the spell already on that button. That covers damage and heal keys, and control keys too: Ctrl+1 for a short Polymorph, Ctrl+4 for a rank 1 Earth Shock. See Downranked spells.
  3. Plain Ctrl binds on Bar 4. A few Action Bar 4 buttons get an ordinary key bind such as Ctrl+Q or Ctrl+5. No macro is involved.

One Ctrl key gets one of these, never two. A plain bind on Ctrl+R would take the key press before a macro on R ever saw it, so a class that puts a cheap rank on Ctrl+R leaves its Bar 4 binds off that key.

Two rules came out of a review of one guild member’s own setup, and both matter in play. unverified on the Forever client until a second member confirms them.

  • Only bind a Shift or Ctrl combo when its slot holds something. A combo bound to an empty button swallows the key press. A combo with no bind at all falls through to the plain key, so the spell on the plain key still casts. Leave the bind off a free slot until you put a spell there.
  • Do not put Target Focus on Shift+F if F is your escape. Shift is often still held from the previous cast. With Target Focus on Shift+F you swap target when you meant to get away. The guides use Shift+Tab for Focus Target and Ctrl+Tab for Target Focus, and they leave Shift+F unbound. That is why Bar 2 button 9 is a click.

If your mouse has two thumb buttons, give them the two keys you most need while your left hand is busy moving.

  • Back button: a second bind for the 4 key, your interrupt.
  • Forward button: a second bind for F, your escape.

A second bind, not a move. 4 and F keep working, so the layout is the same with or without the buttons, and on a laptop with no mouse buttons you lose nothing. The setup steps and a paste line are in Optional: mouse side button binds.

Five steps, in this order. Turn on the bars, run the paste lines, drag your spells in, then bind the Shift keys, then Ctrl. The order matters: a Shift or Ctrl bind on an empty button swallows the key press, so spells go in before those binds. See Layout rules.

New to the client? Pick your control preset and do the first settings on Get ready before you touch the bars. Then open Options, Action Bars. Tick Action Bar 2, Action Bar 3, Action Bar 4 and Action Bar 5. Do this first: a bar’s section only shows in the key bindings menu while the bar is turned on. verified (game files)

This is step 2. Three chat lines set the shared keys for you. Paste each one into the chat box and press Enter. Every command name in them is in the client’s own bindings file. verified (game files) Nobody in the guild has run the lines in game yet, so the pastes themselves are unverified.

The first /run line you ever send makes the client ask once: “You are attempting to run a custom script. Running scripts could compromise your character causing the loss of items or gold. Allow custom scripts?” verified (game files) Say yes. These lines only set key bindings. Do not say yes for a line a stranger hands you.

The first puts Bar 1 on 1 2 3 4 5 Q E R F Z X C:

/run local k={"1","2","3","4","5","Q","E","R","F","Z","X","C"} for i=1,12 do SetBinding(k[i],"ACTIONBUTTON"..i) end

The second sets strafe, Tab, Focus Target and Target Focus:

/run local b=SetBinding b("A","STRAFELEFT") b("D","STRAFERIGHT") b("TAB","TARGETNEARESTENEMY") b("SHIFT-TAB","FOCUSTARGET") b("CTRL-TAB","TARGETFOCUS")

The third saves:

/run local s=GetCurrentBindingSet() SaveBindings((s==1 or s==2) and s or 1) print("Binds saved")

Would you rather do it by hand? Open Options, Keybindings. Leave “Character Specific Keybindings” unticked so every character shares the layout. Then:

  • Action Bar: bind Action Button 6 to 12 to Q, E, R, F, Z, X, C. The game warns that Q and E were strafe keys. Accept.
  • Movement Keys: bind Strafe Left to A and Strafe Right to D. The client has two starting presets. Classic is “Defaulted to camera turning keyboard binds” and Enhanced is “Defaulted to strafe movement keyboard binds”. verified (game files) If you picked Enhanced, A and D may already strafe. Check before you rebind.
  • Targeting: Target Nearest Enemy on Tab, Focus Target on Shift+Tab, Target Focus on Ctrl+Tab. Those are the menu’s exact names. verified

Open your class guide from Pick your class. Open your spellbook and drag each spell to the slot the guide shows, on Action Bar 1 and Action Bar 2. Then drag the potions, bandages and trinkets from Consumable keys onto Action Bar 3 and Action Bar 5. A slot you have no spell for yet stays empty.

Bind Shift only for the slots that now hold a spell.

The fast way is Quick Keybind Mode. Open Options, Keybindings and press the Quick Keybind Mode button at the top. The client’s own words: “Mouse over a button and press the desired key to set the binding for that button.” verified (game files) So hover each filled Action Bar 2 button and press Shift plus the Bar 1 key under it: Shift+1 on button 1, Shift+Q on button 6, and so on. Skip button 9, because Shift+F stays unbound. Skip every empty slot.

Do the same for the other two shared bars:

  • Action Bar 3: buttons 1 to 4 on T, G, V, B.
  • Action Bar 5: buttons 1 to 4 on Shift+T, Shift+G, Shift+V, Shift+B, each one only once its slot holds something. Leave buttons 5 to 12 as clicks.

Optional paste: all of Action Bar 2 at once. This line binds Shift plus the Bar 1 key to eleven Action Bar 2 buttons and skips button 9. It binds every one of them, empty slots included, and an empty slot with a Shift bind swallows the key press. Run it only when all eleven slots hold a spell, or unbind the empty ones afterwards. unverified in game, like the three above.

/run local k={"1","2","3","4","5","Q","E","R","F","Z","X","C"} for i=1,12 do if i~=9 then SetBinding("SHIFT-"..k[i],"MULTIACTIONBAR1BUTTON"..i) end end

Optional paste: the eight consumable and trinket keys. T G V B on Action Bar 3 and the same keys with Shift on Action Bar 5. The line binds all eight at once, empty slots included. If your trinket slots are still empty, use the one-key-at-a-time version on the consumables page and skip the Shift keys for now. unverified in game.

/run local k={"T","G","V","B"} for i=1,4 do SetBinding(k[i],"MULTIACTIONBAR2BUTTON"..i) SetBinding("SHIFT-"..k[i],"MULTIACTIONBAR4BUTTON"..i) end

Run the save line from step 2 again after either paste.

  • Clear the default Ctrl binds you reuse. That means Ctrl+X, Ctrl+F and Ctrl+Z for racials, the Ctrl keys your class guide lists for cheap ranks, and any Bar 4 bind you take. Ctrl plus a number is a pet bar key by default vanilla baseline, so Hunters and Warlocks should think before taking those. The menu lists the pet bar under Action Bar as Pet Action Button 1 to 10.
  • Action Bar 4: bind the few Ctrl keys your class guide suggests, or leave the whole bar as clicks.

What Ctrl is for is in What Ctrl does.

There are two ways, and the client words them differently. verified (game files) for the wording. Nobody in the guild has tried either one in game.

  • In the key bindings menu: right-click the key next to the action. The tooltip on a bound key says “<Right click to unbind>”. Escape does not unbind here. While the menu waits for a key it says “Assign Binding” for the action “or Press Escape to Cancel”.
  • In Quick Keybind Mode: hover the button and press Escape. The tooltip says “Press the escape key to unbind this action.”

One more thing to know: a key can only do one job. Bind a key that another action already had and the game takes it off the old action and says so in red: the old action “is Now Unbound!”

Since the November 4 update, hovering over an action bar keybind in the key bindings menu highlights that button on your action bar, so you can see which slot you are about to bind or unbind. verified

Every row in the key bindings menu has two key slots, so an action can hold two keys at once. verified (game files) Click the second slot next to Action Button 4 and press the back button on your mouse. Do the same for Action Button 9, which is F, with the forward button.

Or paste this. The game calls the side buttons BUTTON4 and BUTTON5. Which one is back and which is forward depends on the mouse, so press each once and swap them in the menu if they come out reversed. Run the save line again afterwards. unverified in game.

/run SetBinding("BUTTON4","ACTIONBUTTON4") SetBinding("BUTTON5","ACTIONBUTTON9")

Options that change how every bind behaves

Section titled “Options that change how every bind behaves”

Six settings decide what a key press does before any macro runs. Check them once. Names, places and wording are the client’s own. verified (game files) All of them sit under Options, in the Gameplay group.

Setting Where What it does
Self Cast Combat A list with four choices: None, Auto, Key Press, Auto and Key Press. Auto: “Automatically cast friendly spells on yourself if you do not have a friendly target.” Key Press: “Hold down the selected key to cast spells on yourself, regardless of target.”
Self Cast Key Combat, under Self Cast. Shown for the two Key Press choices Alt, Ctrl or Shift. “When held this key will allow self casting, even if an enemy is targeted.”
Focus Cast Key Combat Alt, Ctrl, Shift or none. Held, it sends targeted spells to your focus
Mouseover Cast Combat A tick box with its own Mouseover Cast Key. “Once enabled, mousing over a unit frame and casting a spell using a keyboard hotkey will cast it directly on that unit without having it targeted.”
Press and Hold Casting Combat, repeated under Accessibility Hold a key and the spell keeps casting. “This only supports keyboard hotkeys”
Click Casting Keybindings, a button at the top Opens Click Cast Bindings. You pick a spell or macro and click a mouse button on a unit frame to bind it: “Mouseover and click a mouse button to set a binding”

Two more live on the same pages. Quick Keybind Mode is the other button at the top of Keybindings. Character Specific Keybindings is the tick box above it: “Click this to toggle between global key bindings and key bindings specific to this character.”

What to set for this layout:

  • Self Cast: Auto and Key Press, key Alt. The options code uses exactly that as its reset value. verified Bandages, scrolls and heals then land on you when you have no friendly target, and Alt forces it.
  • Keep the Self Cast Key and the Focus Cast Key off Shift and Ctrl. This layout presses Shift and Ctrl with spell keys all day. A cast key on either one would redirect those spells to you or to your focus. Alt or none is safe. The options code names Alt as the reset value for both keys, so check the two lists do not fight each other. unverified in game.
  • Mouseover Cast is a choice. With it on, a plain spell key heals the raid frame under your mouse with no macro. The healer macros in the class guides use [@mouseover] and work with it on or off. Its own key resets to none. verified
  • Press and Hold Casting is a choice. It saves key presses on a filler such as Frostbolt. It does nothing for clicks.

Whether Mouseover Cast and Press and Hold Casting start ticked is stored inside the client. Look once. If spells seem to fire when you let go of a key, see Notes for the curious.

Some forms give Action Bar 1 a second set of twelve buttons. The keys stay the same. The spells on them change. The client’s form table says which. verified (game files)

Class Swaps Action Bar 1 Does not swap
Warrior Battle Stance, Defensive Stance and Berserker Stance. One set of twelve each
Rogue Stealth
Druid Cat Form. Bear Form and Dire Bear Form, which share one set Travel Form, Aquatic Form, Moonkin Form, Tree Form
Priest Shadowform, Spirit of Redemption
Shaman Ghost Wolf
Warlock Metamorphosis

Only Action Bar 1 swaps. Action Bar 2 to 5 hold the same buttons in every form, which is why the consumable keys and the Shift partners never move. A Warrior fills Bar 1 three times, a Rogue twice, a Druid three times. A Moonkin, a Shadow Priest and a Shaman in Ghost Wolf keep their normal bar. The class guides say what goes on each set.

The stance or form buttons themselves have their own bindings: Special Action Button 1 to 10, under Action Bar in the key bindings menu. verified

Your target is the enemy you are killing. Your focus is a second enemy the game remembers for you, with its own portrait. A focus macro casts on that second enemy without dropping your target.

  • Focus Target (Shift+Tab) saves whoever you have targeted as your focus.
  • Target Focus (Ctrl+Tab) switches your target to that saved enemy.

Both are the exact names in the Targeting section of the key bindings menu. verified (game files)

The fallback form below casts on your focus when you have one, and on your normal target when you do not. It works on Forever’s macro system. verified (syntax, see Macros)

#showtooltip Polymorph
/cast [@focus,exists,harm,nodead] Polymorph; Polymorph

Example with two mobs, one a healer:

  1. Click the healer. Press Shift+Tab. It is now your focus.
  2. Press Shift+1. Polymorph lands on the healer.
  3. Press Tab and kill the other mob.
  4. The sheep breaks. Press Shift+1 again. The healer is sheeped and you never changed target.
  5. First mob dies. Press Ctrl+Tab to target the healer and finish it.

Every class guide has its own version of this example.

All of these are in the client’s key bindings menu under these exact names. verified (game files) None has a key in this layout. Add the ones you miss.

Binding Section Why you might want it
Target Mouseover Targeting Targets whatever is under the mouse pointer without a click
Interact With Target Targeting Loots, skins, talks to or attacks your target. One key for the whole after-fight routine
Interact With Mouseover Targeting The same for whatever is under the pointer
Assist Target Targeting Takes your target’s target. Target the tank, press it, hit what the tank is hitting
Target Last Target Targeting Jumps back to the target you had before
Target Last Hostile Targeting Back to the last enemy after you healed someone
Target Nearest Enemy Player, Target Nearest Friendly Player Targeting Tab for players only. For battlegrounds
Target Self, Target Party Member 1 to 4, Target Pet Targeting Healers who do not use mouseover
Start Attack, Pet Attack Targeting Auto attack and the pet’s attack order as plain binds. Hunters: the October 15 beta build adds an Auto Attack/Auto Shot setting that switches between the two for you verified
Assign Skull to Target and the other seven markers Target Markers Mark the kill target without the right-click menu
Stop Casting, Stop Attacking Miscellaneous Cancel a cast to move or to interrupt. Stop hitting a sheep
Toggle Auto Self Cast Action Bar Flips the Auto half of Self Cast from a key

Most of the guild plays on a plain keyboard, and everything above is written for one. This section is for the few members who own a gaming keypad. It is the only place in the keybind guides that talks about them.

A keypad such as the Razer Tartarus is a small keyboard. Out of the box its keys send normal keystrokes: the top row sends 1 to 5, the next rows send Tab Q W E R, Caps A S D F and Shift Z X C, the thumb button sends Alt and the d-pad sends the arrow keys. That covers the twelve spell keys, Tab and Shift, so the layout works with no changes. The key map was checked on a Tartarus V2 on Linux.

What a keypad owner does differently:

  • Consumables. T, G, V and B are not on the pad. Bind Bar 3 buttons 1 to 4 to the four d-pad arrows instead, and Bar 5 buttons 1 to 4 to Shift plus the same arrows. Or reach over to the keyboard for T G V B, which also works.
  • Ctrl. The pad has no Ctrl key out of the box. The better fix is to give it one: on Linux the free Input Remapper app can turn the Caps Lock key (pad key 11 on a Tartarus) into Ctrl.
  • No Ctrl at all. If you leave the pad as shipped, the thumb button sends Alt. Write [mod:alt] where a racial macro or a cheap rank macro says [mod:ctrl], or [mod:ctrl][mod:alt] to cover both. That is fine for racials and damage spells. Alt is the Self Cast Key in the options code’s reset values verified, so a heal pressed with Alt held can land on you instead of your target. Healers should test a heal macro before trusting it.
  • Shift on the thumb. The thumb button can be remapped from Alt to Shift so Shift combos do not need the pinky. If you do that, the pad no longer sends Alt.
  • Caps Lock. If you do not remap Caps Lock, leave it unbound in game. It turns caps on for chat.
  • Software. Razer Synapse is Windows only. On Linux the pad works without it, see Linux.
  • Alt and Tab. On Linux, do not press a thumb button that still sends Alt together with Tab. The desktop reads it as a window switch.
  • Move with strafe, turn with the mouse. Keyboard turning is slow and gets you hit in the back.
  • Bind first, then learn. Set the whole layout once, then play a few quests without touching the mouse buttons on your bars.
  • Keep the 4 key for stopping casts from the day you train it. Reaching for it must be automatic by the time you raid.
  • Consumables are binds too. A potion you have to find with the mouse is a potion you do not drink.
  • New ranks do not replace old ones on your bars. Cast-by-name macros always use the newest rank. verified See Macros.
  • New spells no longer place themselves on an action bar. Drag each learned ability to the key shown in its class layout. changed in Forever verified
  • Screenshot your bars before you buy Dual Specialization. Wowhead’s November 12 headline: “Learning Dual Spec Can Trigger Empty Action Bars When Logging Out in WoW: Forever.” verified (as published, headline only) Players in Blizzard’s WoW Forever bug forum report bars wiping on relog after they bought it. verified (player reports) Blizzard’s Known Issues thread, last updated November 5, does not list it. A screenshot of each bar lets you rebuild the layout in a few minutes if it happens to you. Blizzard fixed it in the November 13 hotfixes: “Action Bar settings” reset every time a player who had bought Secondary Talents logged out. verified The screenshot is still cheap insurance.

Asked of the game files first. These need a test in game.

  • Whether the paste lines run unchanged. The command names are confirmed. Nobody has run the lines.
  • Whether right-click in the key bindings menu and Escape in Quick Keybind Mode unbind a key the way the client’s own text says.
  • Which mouse side button the client reports as BUTTON4 and which as BUTTON5 on your mouse.
  • Whether an unbound Shift or Ctrl combo falls through to the plain key the way the layout rules describe.
  • What each key does by default, see Notes for the curious. That covers Ctrl plus a number on the pet bar.
  • Whether Mouseover Cast, Press and Hold Casting and cast on key down start on or off, and what the Self Cast and Focus Cast Key lists show on a new character.
  • Macro conditionals such as [@focus,exists,harm,nodead]. The client handles them internally and the files cannot confirm them.

You do not need any of this to play. It records what the game files do and do not show.

The command names lag one behind the bar names. MULTIACTIONBAR1 is Action Bar 2, MULTIACTIONBAR2 is Action Bar 3, MULTIACTIONBAR3 is Action Bar 4 and MULTIACTIONBAR4 is Action Bar 5. The client’s bindings file files each command under that header. verified (game files) That is why the paste lines look one bar off.

Cast on key down. Cast on key down has no tick box in the options source we read. The client has the label, “Cast action keybinds on key down”, and the action button code reads a console setting named ActionButtonUseKeyDown. verified (game files) Whether it starts on or off is stored inside the client and is not in the files, so that part is unverified. If spells seem to fire when you let go of a key, type /console ActionButtonUseKeyDown 1.

Default key bindings: what the files do and do not show. We looked for the keys the game ships with. The interface source defines every command and the menu that edits them, and its Reset To Default button asks the client to load a built-in default set. The set itself is not in the interface source or in the data tables we read. A comment in the source names a file inside the client, DefaultBindings.wtf, that the older Classic clients share. verified (game files)

So the files cannot say what T, G, V, B, Ctrl+X or Ctrl+1 do before you change them. One guild member’s saved bindings from the beta show they cleared Ctrl+1 to Ctrl+0, which fits those keys having a default job, and nothing more. To see a default, open Options, Keybindings and read the key next to the action, or press Reset To Default on a spare character.